Color Recipes
Blue, Gray Split Stone
Paint and Primer in one Color: Suede Gray
Pre- Fog with Brilliant Blue spray paint.
Apply Clear SCC Epoxy
Fog Brilliant Blue and Dark Gray into the clear epoxy
Add veins with spray paint in Blue, White, Black, and Gray
Chop the surface.
Fog Black Spray paint and mist.
Mist Metallic Colors Mixed with 91% IPA:Blue Earth and Pearl.
Torch.
Chopped Metallic in White
Paint and Primer in one Color: Natural Gray
Apply SCC epoxy Tinted with White Base Color.
Mist Metallic Colors Mixed with 91% IPA: Deep Silver, Bright Silver, Pearl, and touch of Gold.
Chop all metallics into the surface
Mist more Deep Silver, Bright Silver, and pearl metallic on the chopped surface as desired.
Touch any voided dots with your gloved finger to erase color voids and meld color.
Torch.
Fire on Black
Paint and Primer in one Color: Broadway
Pre-Spray edges with Colonal Red and Fire Orange Spray paint
Apply Clear SCC Epoxy
Fog Colonal Red and Fire Orange Spray paint into the clear epoxy and use brush to meld the spray paint by using long brush strokes.
Mist Metallic Colors Mixed with 91% IPA: Dark Red, Gold, and Pearl. Chop the metallics into the surface.
Touch any voided dots with your gloved finger to erase color voids
Fog Black spray paint and then mist with Deep Red Metallic.
Torch.
Wait 2 hours and mist very fine deep red for added color that won't move as much and remain as "fire dots" on the surface.
Striated Stone Spider Veins
Paint and Primer in one Color: Ethiopia
Fog Spray Paint Colors on Before epoxy: Black, Hammered Brass, Gray Hammered.
Apply Clear epoxy.
Drag spray paint veins in colors as listed:
Rustic Orange, Hammered Gray, Hammered Brass, Black, White, Navajo, Silver Metallic Hammered.
Torch to move and meld striated color
Apply Spider Veins by mixing SCC white metallic powder with SCC clear epoxy and drizzling on spider veins.
Torch.
Slate Stone
Paint and Primer in one Color: Ethiopia
Water down 50-50 mix of water and paint and primer in one in Natural Gray and apply a very wet coat of paint, don't let the paint dry before applying metallics.
Mist SCC Metallic Colors Mixed with 91% IPA directly into the wet paint: Black, Coffee, and Gold
Let the paint and metallic mix dry 24 Hours.
Apply Clear SCC Epoxy taking care not to scratch the color effects under.
Torch.
White Marble with Bronze Deposits
Paint and Primer in one Color: Natural Gray
Apply SCC epoxy Tinted with White Base Color.
Chop small amounts of black spray paint by dipping brush into black spray paint and chopping into the tinted white epoxy.
Drag small amounts of Champagne Bronze Spray paint to create mineral deposits.
Torch.
Black Galaxy
Paint and Primer in one Color: Broadway
Apply Clear SCC epoxy mixed with silver glitter.
Torch.
Soft Green with White Fissures
Paint and Primer in one Color: Natural Gray
Pre-Fog spray paint: Sage and Oregano
Add Clear SCC Epoxy with a touch of white spray paint mixed into the mix before pouring.
Add white veins with small amounts of white spray paint and SCC white metallic powder mixed with epoxy by dragging with a paint stick.
Move veins with a torch
Torch.
Turquoise and metal.
Paint and Primer in one Color: Ethiopia
Pre-Fog spray paint: copper metallic, cover the edges.
Add SCC Epoxy mixed first with brown SCC metallic powder.
After troweling out the brown metallic epoxy mixture add random areas with bronze metallic mixed with clear epoxy.
Chop the brown and bronze.
Mist SCC Metallic Colors Mixed with 91% IPA : Gold and Ocean Blue.
Fog a touch of Seaside spray paint.
Touch any voided dots with your gloved finger to erase undesired areas.
Torch.
Brushed Steel.
Paint and Primer in one Color: Broadway
Pre-Fog spray paint: silver metallic cover the edges random leaving some black showing
Add SCC Epoxy mixed with Black SCC metallic powder in half the epoxy you mix and a second container with Bright silver with the other half of the clear epoxy you have mixed.
Pour out random.
Trowel and chop the black and bright silver epoxy.
Brush the epoxy horizontal.
Torch.
Let sit for about an hour. Use a rag and drag horizontal after an hour.
Torch.
White Marble with veins
Paint and Primer in one Color: Natural Gray
Apply SCC epoxy Tinted with White Base Color.
Chop small amounts of black spray paint by dipping brush into black spray paint and chopping into the tinted white epoxy.
Fog dark gray spray paint and mist with
Torch. Mist SCC Pearl Metallic Color Mixed with 91% IPA
Drag veins through using black and aluminum spray paint, torch them to move them the vein.
Torch.
Hazelnut Slab
Paint and Primer in one Color: Ethiopia
Pre-fog edges with dark copper spray paint.
Mix SCC Hazelnut base color into the clear epoxy then apply to the surface.
Drag the following spray paint colors into the surface: Colonial Red, Cinnamon, Black, Rustic Orange, Warm Yellow, White, and Rose Gold
Torch to move color.
Torch.
Black and white flowing Marble.
Paint and Primer in one Color: Suede
Water down 50-50 mix of water and paint and primer in one in Natural Gray and apply a very wet coat of paint, don't let the paint dry before applying metallics.
Mist SCC Metallic Colors Mixed with 91% IPA directly into the wet paint: Black, White, and Pearl
Let the paint and metallic mix dry 24 Hours.
Apply Clear SCC Epoxy taking care not to scratch the color effects under.
Torch.
Patina Copper Hammered.
Paint and Primer in one Color: Ethiopia
Pre- Roll SCC base color in Copper on the edges
Mix SCC Copper Metallic Powder into the clear epoxy
Apply the copper metallic epoxy mixture by troweling, then chop the surface.
Fog Hunter Green Spray paint for the patina effect.
Torch.
SoapStone
Paint and Primer in one Color: Broadway
Pre-Fog dark gray spray paint
Apply Clear SCC Epoxy
Mix white spray paint into a small amount of clear epoxy. Drizzle and drag color.
Torch to move color.
Torch.
Tropical Turquoise veined
Paint and Primer in one Color: Natural Gray
Pre-Fog edges with spray paint: Lagoon, Oregano
Apply SCC Epoxy Mixed with Tropical Turquoise Metallic powder.
Drag spray paints, Lagoon, Black, and White.
Brush Horizontal.
Torch
Come back in about an hour and drag with a rag.
Torch.
Classic Quartz
Paint and Primer in one Color: Natural Gray
Apply clear SCC Epoxy Mixed with SCC Silver Mica, SCC Crushed pearl Mica, and SCC silver glitter.
Add more mica and glitter topically if desired.
Torch
Rustic River Bed.
Paint and Primer in one Color: Ethiopia
Pre-Fog with Dark Walnut spray paint on sides and surface.
Mix SCC Hazelnut Base into the clear epoxy
Apply the Hazelnut and SCC epoxy mixture by troweling, then chop the surface.
Fog Cinnamon Spray paint
Mist SCC Metallic Colors Mixed with 91% IPA:
Clay, Coffee, and Gold.
Fog with black spray paint
Torch.
Moss Stone
Paint and Primer in one Color: Ethiopia
Pre-Fog with Oregano and Black spray paint on sides and surface.
Mix SCC clear epoxy, break the clear down to 2 containers and mix clear epoxy with White and Butter cream, spread in a random pattern.
Drag the following spray paints into the tinted epoxy: Sage, Oregano, Lagoon, Hunter Green, White, Black.
Torch to move color.
Add more black veins to desired tone.
Torch.
White Stone
Paint and Primer in one Color: Natural Gray
Pre-Fog with White spray paint on Edges.
Mix SCC clear epoxy with SCC White Metallic Powder and SCC white glitter.
Brush Horizontal.
Torch
Come back in about an hour and drag a rag,
Torch.
Ruby Hard Stone
Paint and Primer in one Color: Broadway
Pre-Sponge Paint with the following SCC Base Color tints: Red, Silver, Hazelnut, Black, and Copper
Mix SCC clear epoxy with SCC Silver Glitter and Apply.
Mist Lightly SCC Metallic Colors Mixed with 91% IPA: Deep Red, Black.
Torch
Salt and Pepper
Paint and Primer in one Color: Suede
Pre-Sponge Paint with the following SCC Base Color tints: Black and White
Mix SCC clear epoxy and apply.
Torch
Cape Cod
Paint and Primer in one Color: Suede Gray
Pre-Fog lightly with black spray paint.
Mix SCC clear epoxy pour Half in a new container. Mix half the epoxy with SCC base Color Butter Cream and the other half with SCC base color White.
Pour on Surface.
Drag the following spray paint colors with a stick:
Cobalt Blue, Sea Side, Brilliant Blue, Navy Blue, Spa Blue.
Directional Brush Strokes move and meld.
Mist Lightly SCC Metallic Colors Mixed with 91% IPA: Blue Earth
Torch
When do I stop?
Paint and Primer in one Color: Suede
Pre-Sponge Paint with the following SCC Base Color tints: Black, Gray, Chocolate
Apply SCC clear epoxy
Mist Lightly SCC Metallic Colors Mixed with 91% IPA: Deep Silver and Pearl
Fog Black Spray Paint
Torch
Use your gloved finger to drag veins after it's set for about an hour.
Torch
Copper and Bronze Quartz
Paint and Primer in one Color: Broadway
Pre-Fog Copper spray paint
Mix SCC clear epoxy with SCC Copper Mica, Silver Mica, and Bronze Mica.
Apply SCC epoxy with mixed Mica
Topically add more mica as desired.
Torch
Weathered cut Stone
Paint and Primer in one Color: Ethiopia
Pre-Fog spray paint in Copper and Dark Gray
Apply Clear Epoxy
Add a small amount of SCC clear epoxy with SCC Butter Cream Base tint. Pour on surface in lines of grain flow.
Drag the following spray paint colors in grain flow: Black, White, Metallic Copper, Hammered Gray, Dark Walnut, and Dark Copper.
Move and meld using stick and torch.
Torch
Honed Concrete.
Paint and Primer in one Color: Suede Gray
Pre-Fog Spray paint in black, White and Dark Gray
Apply Clear Epoxy
Fog Spray paint in black, White and Dark Gray
Torch
Hone to desired sheen with SCC Sanding Assortment pack after 5 days at 70 degrees or warmer temperatures
Sea Side Vein
Paint and Primer in one Color: Suede Gray
Pre-Fog Spray paint in Light Gray and copper.
Apply Clear Epoxy
Fog Spray paint in Seaside.
Drag a main vein using spray paint in White black, and Sea Side.
Mist Lightly SCC Metallic Colors Mixed with 91% IPA: Deep Silver and Pearl
Re-Drag more color in main vein using Sea Side, White, and Black as well as clear epoxy in the main vein.
Torch to move the color in the vein
Torch.
Speckled Stone
Paint and Primer in one Color: Ethiopia
Pre-Fog with Dark Copper, copper and Black spray paint on sides and surface.
Apply Clear SCC Epoxy
Mist Lightly SCC Metallic Colors Mixed with 91% IPA: Deep Coffee and Copper
Drag the following spray paints to form a vein. Black, and Hammered Silver.
Squirt the following colors in the same vein of SCC metallic colors mixed with 91% IPA: Ocean Blue and Bronze.
Drizzle some clear epoxy over the established vein to help it flow.
Torch to move color.
Fog lightly with black spray paint.
Torch.
Lace Blue
Paint and Primer in one Color: Suede
Pre-Fog with copper metallic Spray paint lightly
Apply Clear SCC Epoxy.
Fog the following spray paints: Colbalt Blue
Mist SCC metallic colors mixed with 91% IPA: Bright Silver and White
Chop out some random areas.
Torch.
Black Galaxy with Red and Gold
Paint and Primer in one Color: Broadway
Apply Clear SCC epoxy mixed with silver glitter.
Mist SCC metallic colors mixed with 91% IPA: Dark Red and Gold
Torch.
Bright Copper Leathered
Paint and Primer in one Color: Ethiopia
Pre- Roll SCC base color in Copper on the edges
Mix SCC Copper Metallic Powder into the clear epoxy
Apply the copper metallic epoxy mixture by troweling, then chop the surface.
Torch.
Come back in about an hour or more and dab a plastic bag up and down.
Torch
SoapStone Enhanced
Paint and Primer in one Color: Broadway
Pre-Fog dark gray spray paint
Apply Clear SCC Epoxy
Mix white spray paint into a small amount of clear epoxy. Drizzle and drag color.
Torch to move color.
Mist SCC metallic colors mixed with 91% IPA
Bright Silver Metallic
Torch.
Earth Tone Quartz
Paint and Primer in one Color: Ethiopia
Pre-Sponge Paint with the following SCC Base Color tints: Black, Hazelnut, Copper & White
Mix SCC clear epoxy with Gold and Bronze Mica Flakes and apply.
Torch
Black and white flowing Marble. With Metallic
Paint and Primer in one Color: Suede
Water down 50-50 mix of water and paint and primer in one in Natural Gray and apply a very wet coat of paint, don't let the paint dry before applying metallics.
Mist SCC Metallic Colors Mixed with 91% IPA directly into the wet paint: Black, White, and Pearl
Let the paint and metallic mix dry 24 Hours.
Apply Clear SCC Epoxy taking care not to scratch the color effects under.
Mist SCC Metallic Colors Mixed with 91% IPA
Bright silver and pearl lightly
Torch.
Exotic Sand Stone
Paint and Primer in one Color: Ethiopia
Pre-Fog the piece with Champagne Bronze Spray Paint.
Mix SCC clear epoxy and apply.
Mist SCC Metallic Colors Mixed with 91% IPA Gold and Bronze metallic powders.
Fog Champagne Bronze
Mist SCC Metallic Colors Mixed with 91% IPA Gold and Bronze metallic powders.
Torch
Blue Magic
Paint and Primer in one Color: Suede
Pre fog blue spray paint
Apply Clear SCC Epoxy
Mist SCC Metallic Colors Mixed with 91% IPA : Ocean Blue, Blue Earth, and Pearl
Torch.
Exotic Granite earth
Paint and Primer in one Color: Ethiopia
Pre-Fog the piece with copper Spray Paint.
Mix SCC clear epoxy and apply.
Mist SCC Metallic Colors Mixed with 91% IPA Gold and Brown metallic powders.
Fog Black spray paint
Mist SCC Metallic Colors Mixed with 91% IPA Gold and Gold and brown metallic powders.
Mist SCC Metallic Colors Mixed with 91% IPA Gold and Brown metallic powders.
Fog Black spray paint
(Continue Steps until desired finish)
Torch
Hazelnut Slab
Paint and Primer in one Color: Natural Gray
Pre-fog with dark Almond spray paint.
Mix SCC clear epoxy then apply to the surface.
Drag the following spray paint colors into the surface: Black, Rustic Orange, Warm Yellow, White, Lagoon, and Navy Blue
Torch to move color.
Torch.
White Marble with veins and Bronze accents.
Paint and Primer in one Color: Natural Gray
Apply SCC epoxy Tinted with White Base Color.
Chop small amounts of black spray paint by dipping brush into black spray paint and chopping into the tinted white epoxy.
Fog dark gray spray paint and mist with
Torch. Mist SCC Pearl Metallic Color Mixed with 91% IPA
Drag veins through using black and aluminum spray paint, torch them to move them the vein.
Add a touch of Bronze metallic spray paint.
(You just need to add more black to darken areas)
Add the very large veins last, this color looks good with silver spray paint in the veins as well.
Torch.
Fractured Granite
Paint and Primer in one Color: Suede
Apply Water
Fog black spray paint and bronze spray paint and torch to break up the color.
Apply Clear SCC Epoxy after the paint has dried 24 Hours.
Mist SCC Metallic Colors Mixed with 91% IPA : Deep Silver and Pearl
Torch.